Docs

The Kathaka Studiohandbook.

Practical chapters with steps, what you should see, and what to do when something goes wrong. The same handbook is built into the app and works offline.

Open the printable handbook

Documentation & product specification

English · 10 / 27

Draw and ink

Now the fun part: drawing! Kathaka Studio works with a mouse, a finger or a drawing pen. A pen that knows how hard you press makes thick and thin lines.

Draw a line

  1. Pick the Pen tool. Or press P.
  2. Draw on the page.
  3. Press ] to make the pen bigger. Press [ to make it smaller.
  4. To pick a colour, press the Color palette button on the right.

Fix a mistake

  1. Press Ctrl+Z to undo the last line.
  2. Press Ctrl+Shift+Z to bring it back.
  3. To rub out part of a drawing, pick the Eraser (E) and draw over it.

Make lines smooth and nice

  1. Open the Draw & Paint menu and choose Drawing studio.
  2. Pick a Brush preset, like the G-pen.
  3. Change the Pressure curve to make the pen feel softer or harder.
  4. Press Apply brush settings.
  5. In the Brush palette, raise Stabilization to make shaky lines smooth.

Draw with your finger on a phone or tablet

  1. On phones and tablets, one finger draws. Two fingers move and zoom the page.
  2. If your finger does not draw, open Drawing studio and turn on Draw with touch.

Drawing, brushes, erasing and screentones

  1. Select a panel and open Draw & Paint → Brush palette.
  2. Choose a brush, line width, stabilization and pressure behaviour.
  3. Draw with Pen. Use Eraser for strokes or Fill for enclosed regions.
  4. Choose a screentone and inspect its appearance at the intended output size.

Arrange the flat canvas and depth preview

  1. Drag the divider between the editable canvas and 3D viewport to give each more space. Portrait layouts stack the views; wide landscape layouts place them side by side.
  2. The depth image is clipped inside its stage, separate from its title, controls and hint. Zoom and orbit affect the depth view without moving or changing the original artwork.

Editable geometry and painting inside shapes

  1. Open Geometric shapes or the visible Shapes button. Create a shape layer and drag a rectangle, rounded rectangle, ellipse, triangle, polygon, star or line.
  2. Select the object in Shapes. In Shape properties, adjust position, dimensions, rotation, corner radius, polygon sides or star points. Use fill, stroke or gradient controls for appearance.
  3. Choose the selected shape as the drawing boundary before painting or sketching inside it. Transform the object and check its attached marks; Undo and save/reopen preserve the editable result.

Pencils, nibs, pressure and sketch techniques

  1. Open Brushes → Sketching. Try the 24 graphite grades from 10H to 12B, mechanical nibs, charcoal and colored pencils; choose a color and width.
  2. Open Nib and pressure settings to adjust nib size and pressure response. Test light and firm strokes with a pressure-capable pen; finger and mouse input do not supply real pen pressure.
  3. Choose a sketch technique and Set up technique tool for hatching, cross-hatching, stippling or other studies. Compare live and saved strokes near all four page edges, then Undo or save the study.

Erase ink, pencils and paint

  1. Select the artwork layer and choose Universal eraser to remove ink, pencil, charcoal, colored-pencil or painting marks.
  2. Change eraser size for broad cleanup or narrow edges. For geometric objects use Object eraser; erase only after checking the selected object or layer.
  3. Try Undo and Redo, then save and reopen. Erasing a local layer does not grant permission to change shared artwork; acquire its server lock first.

Rulers, axes and straight edges

  1. On mobile, use the visible ruler control above the canvas; on desktop open the drawing ruler controls. Enable measuring rulers and horizontal or vertical axis guides.
  2. Select a straight-edge axis or symmetry ruler and draw a short test line. Zoom, rotate and pan the canvas to check that guides stay aligned with page coordinates.
  3. Apply settings and read the confirmation toast. Lift the pen near the top, bottom and sides to check that the saved stroke stays in place; use Undo to discard a test.

Vector paths, SVG and image trace

  1. Open Layers → Pixel, vector & masks and choose New vector layer, or use Geometric shapes to create editable objects.
  2. Draw a path and use Finish open path or Cancel path as needed; adjust its anchors and handles, fill, stroke, gradient, joins and caps.
  3. Select a shape to Apply style, edit Shape properties or Paint / sketch inside shape; use a separate extension layer when marks must cross the boundary.
  4. Use Import SVG or Image trace to bring in artwork, review trace threshold, colors and smoothing, then inspect the resulting paths.
  5. Use Export SVG for the vector artwork and save the book separately; check the exported file in your destination application.

Full Preview without editing controls

  1. Open View → Full Preview or press F after finishing your active stroke.
  2. Choose Brush palette or Color palette, select your brush or color and choose Apply; draw directly on the page with a pen or enabled touch input.
  3. Open Canvas rulers and straight edge for top and left measuring scales or horizontal and vertical drawing; choose the settings and Apply.
  4. Use the width slider and − / + to resize your pen, eraser or paint brush; tap the millimetre value to enter an exact width and Apply. Eraser width is the full diameter; each tool keeps its own size.
  5. Use Switch to pan for navigation or pinch with two fingers; the corner controls button or H reveals or hides tools, which auto-hide after three seconds.
  6. Use Eraser and Undo as needed; Exit preview, Esc or Android Back restores the editing view and open settings while keeping your chosen brush and color.

Clear artwork or start a blank page

  1. Choose Page → Clear Panel, Clear Current Page or Reset to Blank Page, or use the page options and broom icon.
  2. Clear Panel keeps its frame; Clear Current Page keeps the layout; Reset to Blank Page removes frames too while keeping page size and book position.
  3. The confirmation includes hidden and locked layers; other pages and saved assets stay intact; shared editing needs a whole-page lock with write access to every panel.
  4. Confirm one operation and use Undo if needed; a changed book or pending drawing blocks stale confirmation.
  5. Universal eraser can erase all visible drawing layers or just the active layer; pencil, ink and paint are supported, locked layers stay protected and blank-paper sweeps are allowed.

Sketch grids for pages, panels and Full Preview

  1. Open View → Sketch grid or use Sketch grid in Full Preview.
  2. Choose Whole page or a panel; turn off Use page grid for this panel for independent settings.
  3. Enable Show sketch grid, then choose millimetre spacing or rows and columns; use a preset or enter values.
  4. Set color, opacity, thickness, major line interval and A1/B2 labels, then Apply; closing discards the draft.
  5. Draw and navigate normally; guides follow page and panel boundaries, with density adjusting to the zoom level.
  6. Reopen Sketch grid to hide guides or restore inheritance; settings stay on this device and exports stay free of grid guides.

Tone and color for panels and objects

Requires a build with My characters · not yet in public installers

  1. Choose a panel, then open Draw → Tone & color adjustments; use Select object or Lasso first for an object in a flattened image.
  2. Choose Whole panel, Selected object / area or Active object layer; use the base layer for a separate object.
  3. Adjust Brightness, Contrast, Saturation, Hue, Highlights, Midtones and Shadows; compare with Show saved appearance.
  4. Choose Apply to save one editable adjustment; Undo restores the previous appearance and Reset adjustments prepares neutral values.

What you should see

Your lines appear on the page in the colour and size you chose.

Good to know

Press E to open the round radial menu under your pen. It has your favourite tools.

If something goes wrong

If nothing appears, check that a panel is selected and that its layer is not locked or hidden.